IvBaselineDimensionSet creates a baseline dimension set in an Inventor drawing.
IvOrdinateDimensionSetModifier
IvCommonDimensionSetMixin
IvCommonDimensionMixin
BaseInventorMixin
BasePart
| Name | Type | Description |
|---|---|---|
| AllowEmpty? | Boolean | If False (old behavior), with creation errors, the exception is thrown.
If True, the creation errors are ignored and the %%updateSelf Rule is set to NoValue (though the dimension child is still in the intent tree, it is not created in Inventor drawings). Default: False. |
| ArrangeText? | Boolean | Flags to automatically arrange texts of the dimensions.
Default: False. |
| Arrowhead1Inside?
Arrowhead2Inside? |
Boolean | Indicates that the arrowhead is inside. |
| Arrowhead1Type
Arrowhead2Type |
Name | Indicates the type of the arrowhead.
Possible values: :ByStyle, :Blank, :Circle, :Closed, :Datum45Blank, :Datum45Filled, :Datum60Blank, :Datum60Filled, :Filled, :Flared, :Half1Filled, :Half1Flared, :Half2Filled, :Half2Flared, :LargeDot, :None, :Oblique, :Open, :Origin, :SmallDot, :ThickLine. Default is :ByStyle. |
| DimStyle | String | The Inventor dimensioning style to be used. |
| DimType | Name | Dimension alignment, possible keywords: :vertical, :horizontal, :aligned.
Default: :Aligned. |
| ExtensionLine1Visible?
ExtensionLine2Visible? |
Boolean | Indicates that the extension line is visible. |
| GeometryIntents | List | List of Lists in the form of: { {part1,entity1[,intent1[,closestPoint1]]}, _ {part2,entity2[,intent2[,closestPoint2]]}, _ … {partN,entityN[,intentN[,closestPointN]]}}.
The attachment point is specified for other dimensions. |
| Layer | string | The name of the layer for the dimension. |
| OriginMember | Integer | Specifies which sublist in the GeometryIntents Rule describes the origin dimension.
Default: 1. |
| Precision | Integer | The number of decimal places displayed for this dimension.
Valid values 0…8 or NoValue. Default: NoValue. |
| TextOrigin | Point | The placement position of the dimension text. |
| ToleranceHole | String | The string specifying the hole tolerance.
Default: NoValue. |
| ToleranceLower | Number | The lower variation from the nominal value.
Default: NoValue. |
| ToleranceMethod | Name | Specifies the tolerance type.
Valid values: :Basic, :Default, :Deviation, :LimitLinear, :LimitsFitsLinear, :LimitsFitsShowSize, :LimitsFitsShow, :LimitsFitsStacked, :LimitsStacked, :Max, :Min, :Override, :Reference, :Symmetric or NoValue. Default: NoValue. |
| TolerancePrecision | Integer | Number of decimal places displayed for the tolerance.
Valid values 0…1 or NoValue. Default: NoValue. |
| ToleranceShaft | String | The string that specifies the shaft tolerance. |
| ToleranceUpper | Number | The upper variation from the nominal value.
Default: NoValue. |
| View | Part | Represents the Drawing View's model containing the entities for dimensioning. |