IvSketchLine creates a Line in a drawing sketch.
IvSketchLineModifier
LineMixin
BasePart
Most of the rules for IvSketchLine are provided by LineMixin. It provides many different options for specifying the position of the line. Typically, a line would be defined by 2 points: thruPoint1, and thruPoint2.
| Name | Type | Description |
|---|---|---|
| sketch | any | Identifies the sketch onto which the sketch line should be placed. |
| layer | string | Specifies the layer style to use for the sketch line. Defaults to empty string, and uses the "By Standard" style. |
| thruPoint1 | any | First point the line should go through. This is the start point , only if the curve parameter 'start' has not been provided. |
| thruPoint2 | any | Second point the line should go through. This is the end point , only if the curve parameter 'end' has not been provided. |
| alignment | integer | Alignment with one of the base axis. 1 stands for alignment with the X-Axis, 2 stands for the Y-Axis. |
| angle | number | Angle relative to the positive X-Axis. This input is used, to orient the line in the plane. |
| baseAxis | part | Object used as reference for angle: |
| dirVector | vector | Direction of the line from start to end point. |
| distance | number | Distance from the origin of the line defined with parameter 'offsetFrom'. |
| end | number | Parameter at the end of the line. |
| length | number | Length of the line. |
| offsetFrom | part | Line that defines the basis for an offset line with offset 'distance'. |
| onRight1 | boolean | This parameter defines the orientation of the line, in case it needs to be tangential to two arcs. An imaginary line between the centers of 'tanArc1' and 'tanArc2' is the basis. If 'onRight1' is TRUE , the center of the new arc is on the right side of the line; if 'onRight1' is FALSE the center of the new arc is on the left side of the line. |
| onRight2 | boolean | This parameter defines the orientation of the line, in case it needs to be tangential to two arcs. An imaginary line between the centers of 'tanArc1' and 'tanArc2' is the basis. If 'onRight2' is TRUE , the center of the new arc is on the right side of the line; if 'onRight2' is FALSE the center of the new arc is on the left side of the line. |
| parallelTo | part | Input line that the new line should be parallel to. |
| perpendicularTo | part | Input line that the new line should be perpendicular to. |
| start | number | Curve parameter at the start point of the line. Changing the default of ?0? changes the start point of the line. |
| tanArc1 | part | Input arc that the line should be tangent to. The parameter 'onRight1' must also be defined to specify an unambiguous orientation of the line. |
| tanArc2 | part | Input arc that the line should be tangent to. The parameter 'onRight2' must also be defined to specify an unambiguous orientation of the line. |
| Name | Type | Description |
|---|---|---|
| p0 | point | Start point of Line. |
| v0 | vector | Direction vector of Line. |
| u0 | number | Curve parameter at start point of Line. Default value is 0.0. |
| u1 | number | Curve parameter at end point of Line. Default value is the length of the line. |
| defaultEnd | number | Default Curve parameter at the end of the Line. Normally, this is the end of the line. |
| endPoint | point | Point at end of Line. This is calculated as: p0 + (u1 * v0). |
| polygonPoints | list | List with two points , the start and end point , calculated as:{startPoint, endPoint}. |
| startPoint | point | Point at start of Line. This is calculated as: p0 + (u0 * v0). |
| midPoint | point | Center point of Line. |