Transform Attributes
See General attributes in the Basics guide.
Pivots
Specifies whether to display the IK handle’s rotate pivot and scale pivot. The Local Space and World Space sections specify the pivot positions in local space (relative to the IK handle) and world space.
Limit Information
Specifies the transform limits for the current joint or IK handle.
The
Min and
Max checkboxes turn on the
Min or
Max limits and the
and
icon buttons change their corresponding
Min or
Max limit values to the
Current value.
Translate
Select one of the following options:
- Trans Limit X
-
Specifies translation limits on the joint’s local X-axis.
- Trans Limit Y
-
Specifies translation limits on the joint’s local Y-axis.
- Trans Limit Z
-
Specifies translation limits on the joint’s local Z-axis.
Rotate
Select one of the following options:
- Rot Limit X
-
Specifies rotation limits about the joint’s local X-axis.
- Rot Limit Y
-
Specifies rotation limits about the joint’s local Y-axis.
- Rot Limit Z
-
Specifies rotation limits about the joint’s local Z-axis.
Scale
Select one of the following options:
- Scale Limit X
-
Specifies scaling limits along the joint’s local X-axis.
- Scale Limit Y
-
Specifies scaling limits along the joint’s local Y-axis.
- Scale Limit Z
-
Specifies scaling limits along the joint’s local Z-axis.
Note:If you are using a Full Body IK, only rotational limits are supported.
Display
See Animation Options.
Node Behavior
See Node behavior and Set a node’s update state.