Injection Location for Thermoplastics Processes dialog
This dialog is used to specify values for certain inputs common to all thermoplastics processes.
Dialog element - General tab | |
---|
| Select and edit the material to analyze. |
| Allows you to select and edit a process controller to control the injection molding process during the analysis. |
| Select and edit an injection molding machine to simulate your molding machine during the analysis. You can configure the injection unit, hydraulic unit, and clamping unit. |
| Allows you to select and edit the mold material to be used during the analysis. You can specify the density, specific heat, and thermal conductivity of the mold material. |
| Allows you to select and edit the solver parameters to be used during the analysis. For example, you can configure intermediate results, mold/melt convergence criteria, and analysis restart settings. |
Dialog element - Design of Experiments tab | Explanation |
---|
| Allows you to select and/or edit default inputs for a Design of Experiments analysis. |
Dialog element - Process Optimization tab | Explanation |
---|
| Allows you to select and/or edit default inputs for a Process Optimization analysis. |
Dialog element - Injection-Compression tab | Explanation |
---|
| Allows you to select and/or edit a predefined compression press controller to be used for the Injection-compression analysis. |
Dialog element - Co-injection tab | Explanation |
---|
| Allows you to select and/or edit the material used by Controller B in the analysis. |
| Allows you to select and edit a process controller to control the second-material related processing conditions of the analysis. |
| Allows you to select and/or edit the injection molding machine used to inject polymer B in the Co-injection process. |
Dialog element - Mold Opening Direction tab | |
---|
| Specifies a direction by means of a vector, where X, Y and Z refer to the global axes and the sign of a component corresponds to the +ve or -ve direction on that global axis. |
Dialog element - Molding Window tab | Explanation |
---|
| Allows you to select and/or edit default inputs for a Molding Window analysis. |
Dialog element - Runner Balance tab | Explanation |
---|
| Allows you to select and/or edit default inputs for a Runner Balance analysis. |
Dialog element - Gate Location tab | Explanation |
---|
| Use the Minimum thickness ratio to automatically exclude extremely thin regions from being considered as positions for injection locations. |
| Specifies the maximum injection pressure to be used in the gate location analysis. The gate location algorithm will take this limit into consideration when searching for feasible gate locations. |
| Specifies the maximum clamp force to be used in the gate location analysis. The gate location algorithm will take this limit into consideration when searching for feasible gate locations. |