Netfabb fixed issues
This is a selection of issues fixed with the 2023.0 release.
Netfabb
CAD support
| Note |
Key |
| Fixed an issue that caused a part imported from a SAT file to be mirrored |
NC-14792 |
Back to top
Cutting
| Note |
Key |
| Fixed an Assertion failed error when trying to move a free-cut stencil corner while viewing it exactly edge-on |
NC-14779 |
Back to top
| Note |
Key |
| Fixed an issue that caused failure to load OBJ files |
NC-14897 |
| Fixed an issue that caused an error loading badly written VRML files (containing empty shape nodes) |
NC-14985 |
| Fixed an issue in OCM export where downskins would not be exposed with the dedicated laser power value |
NC-14997 |
Back to top
GUI and workflows
| Note |
Key |
| Fixed an issue that kept the expanded tooltips of menu items open when they should have closed automatically |
NC-13034 |
| Caught more icons not being scaled correctly on 4K displays |
NC-13248 |
| Fixed an issue that would cause the uniform remeshing in Mesh manipulation to throw an error if the edge preservation angle was left at its default value even when that function wasn't used. |
NC-15003 |
Back to top
Labeling
| Note |
Key |
| Improved the robustness of labeling against placement failure due to close walls or partial overhangs above the target surface |
NC-13376 |
Back to top
Machine workspaces
| Note |
Key |
| Fixed placeholder text in Stratasys Origin One machine |
NC-14611 |
| Fixed error "file data/support_config.xml not found in container" upon trying to generate supports in an NXT QLS350 machine |
NC-14623 |
| Fixed source of Lua error when loading a project containing a (now Stratasys) Origin One machine |
NC-14643 |
| Fixed an Access violation error during buildfile export from the Concept Laser machine |
NC-14682 |
| Fixed parameter only every n-th stripe being ignored in Slicing and workspace toolpathing |
NC-14708 |
| Fixed password prompt appearing on opening an EBPA that had no password set in the first place |
NC-14813 |
| Fixed the laser field order of Additive Industries machine support. The correct order is #4-#3-#2-#1 in positive X direction. |
NC-14841 |
| Fixed errors in buildfile export for 3D4MEC machines |
NC-14923 |
| Fixed an issue in the Rapid Shape engine that would cause the inclusion of a zero-length layer image, causing the whole buildfile to be corrupted |
NC-14941 |
Back to top
My machines
| Note |
Key |
| Fixed a bug that caused a 3D Mectronic machine to appear with placeholder text in the project tree after loading a project with a machine that had no corresponding My Machines record |
NC-14681 |
Back to top
Packers
| Note |
Key |
| Fixed missing localization in size sorting packer |
NC-12774 |
Back to top
Repair
| Note |
Key |
| Identified and rectified a source for an "Assertion failed" error on attempting to split non-manifold edges in a particularly hopelessly broken model, and added a less mysterious error message. |
NC-13060 |
| Made Repair more robust against never-ending loading of STL files with badly damaged parts with certain configurations of holes |
NC-13297 |
| Identified and rectified a source for Netfabb crashing when stitching certain broken models |
NC-14642 |
| Fixed access violation error happening during attempted repair of triangle mesh with corrupt triangle data |
NC-14819 |
Back to top
Manual slicing
| Note |
Key |
| Made importing Binary CLI slice files more robust against file writers using CRLF instead of just LF in the header |
NC-13674 |
| Aligned and corrected parameters for layer filter in slicing and workspace toolpathing. |
NC-14573 |
| Slicing statistics no longer skips layers that have no toolpath content from any slice stack present |
NC-14636 |
| Fixed a bug that caused an irrecoverable error and a prompt to close Netfabb when moving the group of a restored source slice stack from one platform to another |
NC-14620 |
Back to top
Supports
| Note |
Key |
| Fixed an issue that caused incorrect handling and preprocessing of thickened open volume support upon sending it from Netfabb to Simulation Utility |
NC-13250 |
| Fixed an issue in support generation where closed-wall polyline support would generate jagged and irregular if the thickness of the wall approached the triangle size along the supported stretch |
NC-14697 |
| Fixed a bug where a refresh of generated support after retessellation of the part would refresh the support with an incorrect result |
NC-14740 |
| Fixed a bug in bar supports generation that caused certain pad height values to produce incorrect transitions from bar to pad |
NC-14918 |
| Fixed an inconsistency where the stand angle would apply for volumes differently depending on whether they were created as closed volumes or open and structured ones. |
NC-14943 |
Back to top
Misc
| Note |
Key |
| Exporting parts directly as CLI slice files should no longer lead to "secretly" overwriting files with existing names and should generate names with suffixes instead (eg. "_2") |
NC-13339 |
| Significantly reworked baseplate generation to mitigate against triangulation errors that could lead to symptoms like floating or detached baseplates |
NC-14635 |
| Back to top |
|
ATU
| Note |
Key |
| Fixed an issue that would fail to update the platform scene boundaries when the platform size changes, such as during switch of machines |
NC-14645 |
| Fixed an issue that made the Part entry in the context menu of the toolpath preview disappear when the layer thickness is changed |
NC-15001 |
Fixed an issue in bsFile that prevented proper conversion from little-endian to big-endian byte format |
NC-14899 |
| Fixed a number of issues in smoke simulation that prevented proper detection of laser-and-smoke collision |
NC-14921 |
| Fixed an issue in smoke simulation that caused detection of laser-and-smoke collision for ignored smoke |
NC-14962 |
| Made loading of projects created with older ATU versions more robust |
NC-14855 |
| Changing the layer thickness no longer resets part parameter profile to default |
NC-14987 |
| Fixed the unit for the focus in EBPA configurations for Renishaw. It was asking for micrometers. It is now asking correctly in millimeters. |
NC-14673 |
| Using UNC-style filepaths no longer throws an error message. Using the workaround of assigning a local drive letter to such a share and using filepaths based on that is no longer necessary. |
NC-14639 |
Back to top
Simulation Utility
| Generating warped STL |
|
| Trying to generate a warped STL should no longer fail when the project name contains the space character |
ANFB-3128 |
Back to top