| G3013
|
WARNING: G3013
|
elemtype ELEMENT
id HAS A TAPER RATIO GREATER THAN
tol
|
|
|
Cause:
|
The specified element has a quadrilateral face taper ratio greater than the preset warning tolerance (dependent of element type):
HEXFACETAPERTOL,
PENTFACETAPERTOL,
PYRFACETAPERTOL, and
QUADTAPERTOL.
|
|
|
Action:
|
Perform the following depending on the element type referenced:
- If the taper ratio is excessive, consider remeshing the applicable region.
- For hex elements set the
HEXINODE model parameter to ON.
- For quad elements set the
QUADINODE model parameter to ON.
- For quad elements set the
SHELLRNODE model parameter to ON.
|
|
|
Remarks:
|
See Autodesk Nastran Reference Guide, Section 5,
Parameters, for more information.
|