| E5084
|
WARNING: E5084
|
USING PREVIOUSLY CONVERGED STIFFNESS MATRIX FOR THIS UPDATE
|
|
|
Cause:
|
A singular or non-positive definite tangent stiffness was detected and reset in a nonlinear static solution with the
NLNPDKRESET model parameter set to ON.
|
|
|
Action:
|
The stiffness matrix will be automatically reset to the last converged tangent stiffness matrix. If a fatal error results, try one of the following:
- Increase the number of load increments specified in field 3 of the
NLPARM Bulk Data entry or divide the loading using several subcases.
- Reduce the applied loading.
- Investigate any nonlinear material properties (nonlinear elastic, thermo-elastic, elastic-plastic) that are specified.
|
|
|
Remarks:
|
None.
|