| T2220 | WARNING: T2220 | WILL ATTEMPT TO CORRECT SINGULAR GEOMETRY FOR elemtype ELEMENT id |
| Cause: | The specified element is not valid or is highly irregular and the AUTOFIXELEMGEOM model parameter was set to ON. The Model Translator will attempt to correct the singularity by reordering the element nodal connectivity table. | |
| Action: | If this message was followed by a T2221 error, check the element connectivity and grid point coordinates. Otherwise, the element was corrected. | |
| Remarks: | See Autodesk Nastran Reference Guide, Section 4, Bulk Data, for entry format. |