| T2088 | FATAL ERROR: T2088 | TABLE INITIAL SLOPE (value) NOT EQUAL TO MAT ENTRY VALUE |
| Cause: | A MATS1 Bulk Data entry referenced a TABLES1 entry where the slope defined by the first two points differed significantly from the Young’s modulus (E) specified on the corresponding MATi entry. | |
| Action: | Either correct the second TABLES1 data point or the MATi E value so the slopes are the same (i.e., E = Y2/X2). | |
| Remarks: | See Autodesk Nastran Reference Guide, Section 4, Bulk Data, for entry format. |