| T2114
|
FATAL ERROR: T2114
|
UNABLE TO INTERPOLATE DATA AND GENERATE SET, STATUS:
n
|
|
|
Cause:
|
A
TEMPINTERPOLATE,
DISPINTERPOLATE, or a
LOADINTERPOLATE Case Control command was unable to generate interpolated data based on the input data provided. The status codes have the following meaning:
| Code
|
Meaning
|
|---|
| 1
|
Invalid input parameters. One of the following causes:
- An insufficient number of input data points were specified. A minimum of 10 points is required.
- Interpolation command advanced settings are invalid.
|
| 2
|
Duplicate input data point coordinates were specified.
|
| 3
|
Input data points are collinear.
|
| 4
|
Other input data error.
|
|
|
|
Action:
|
Correct the input data based on the status code.
|
|
|
Remarks:
|
See Autodesk Nastran Reference Guide, Section 3,
Case Control, for command format.
|