| T2106
|
WARNING: T2106
|
UNABLE TO DEFINE SET
id USING SPECIFIED PARAMETERS
|
|
|
Cause:
|
The specified set could not be generated using the parameters listed on the corresponding
SETGENERATE Case Control command.
|
|
|
Action:
|
Check the data on the SETGENERATE command. Some common errors include:
- Specifying the wrong method type.
- Specifying a property or material identification number that does not exist.
- Specifying an invalid coordinate component value.
|
|
|
Remarks:
|
See Autodesk Nastran Reference Guide, Section 3,
Case Control, for command format.
|