The
Turning category on the
Strategy Selector dialog contains strategies required to machine a turned part:
The turning strategies are:
- Bore Finishing finish machines a bore in a turned part.
- Bore Roughing rapidly bores a turned part.
- Face Finishing finish machines the face of a turned part.
- Face Roughing rapidly removes material on a face of a turned part.
- Groove Finishing finish machines a turned groove.
- Groove Roughing
rapidly removes material in a groove.
- Pattern Turning rapidly removes material in passes specified by the geometry in a pattern.
- Turn Finishing finish machines the turned part.
- Turn Roughing rapidly removes material around the turned part.
The common tabs are described in
common toolpath strategy pages.
For more information on the
Strategy Selector dialog, see
Toolpath Strategies.