PowerMill 2023.0.2 update
The fixes in PowerMill 2023.0.2.
| Toolpath fixes |
| A problem has been fixed that caused excessive lifts along passes in Corner Finishing. PMILL-18696, PMILL-18628 |
| A problem has been fixed that caused the preparation of the model when calculating toolpaths to become excessively slow. PMILL-17388, PMILL-18408, PMILL-18470 |
| The preview for Projection Finishing toolpaths has been reinstated. PMILL-18480 |
| The preview for Projection Plane Finishing and Projection Surface Finishing toolpaths is no longer wrongly offset when Projection Range is set to Automatic. PMILL-18469 |
| A problem has been fixed that could result in unsafe links when calculating toolpaths with a fixed elevation in the tool axis. PMILL-18682 |
| A problem has been fixed that prevented extra points from being inserted when using Edit Within Region with the Redistribute method. PMILL-18187 |
| General fixes |
| The performance has been improved when creating entities when the project already contains a significant number of entities. PMILL-18545 |
| The performance has been improved when updating the Explorer where the project contains a significant number of entities. PMILL-18314 |
| Recovering a setup from the Recycle Bin now fully restores the entities that were stored within it. PMILL-18359 |
| An error is now displayed when you write an NC Program that includes a toolpath where the start or end parameters, or both, do not match the actual start and end of the toolpath. The underlying cause of this inconsistency was fixed in PowerMill 2023.0.1. The error is intended to alert you to problems in preexisting projects. PMILL-17931, PMILL-17756, PMILL-16718, PMILL-17493 |
| Security |
| A potential security issue has been resolved by ensuring a specific parameter respects your preferences for whether to trust remote paths. PMILL-18095 |
| Customer error reporting (CER) fixes |
| A problem has been fixed that caused PowerMill to close unexpectedly when calculating a flat finishing toolpath or an area clearance toolpath with the Flat option. This issue was identified by CER. PMILL-17958 |
| An issue that caused PowerMill to unexpectedly close following interacting with Stock on the Setup dialog has now been fixed. This issue was identified by CER. PMILL-17957 |
| An issue that caused PowerMill to unexpectedly close while exiting has now been fixed. This issue was identified by CER. PMILL-18477 |
| A problem has been fixed that caused PowerMill to close unexpectedly when calculating a Steep and Shallow Finishing toolpath using the Centreline option for shallow passes. This issue was identified by CER. PMILL-16993 |
| A problem has been fixed that caused PowerMill to close unexpectedly when calculating a boundary around the flat areas of the model. This issue was identified by CER. PMILL-18451 |
| A problem has been fixed that caused PowerMill to close unexpectedly when multiply transforming a toolpath. This issue was identified by CER. PMILL-18683 |