Adds isometric split points (break points) to the 3D model.
Access Methods
Command entry:
plantisosplitpoints Summary
The isometric start point and split points can be explicitly placed into the 3D model. The next time an isometric drawings are created the same split points are used.
You can also use the Convert Split Points dialog box to save split points and start points. This command provides additional options.
List of Prompts
The following prompts are displayed.
Select isometric style to use or [?] <current iso style>:
Specify line numbers to add iso split points or [?] <*>: ?
Split points are available for lines: 101, 102, 3301.
Specify line numbers to add iso split points or [?] <*>: *
Replace break points? [Yes/No] <Yes>:
Add start points? [Yes/No] <Yes>:
- Iso Style
-
Specifies the Iso Style to import from.Note: The style name is not saved into the 3D Model. Once saved in the 3D model, split points and the start point apply to all isometric drawings created, regardless of the Iso Style used.
- Line Number
-
Specifies the line numbers. You can use wildcards. An asterisk (*) specifies all lines.
Note: Only line numbers that are in the current drawing can be saved to the 3D model. However, all drawings that contain the line number are modified. Additional drawings that contain the line number are opened in the drawing editor. - Replace Break Points
-
If yes, existing split points are removed from the 3D model. If you Ignore Break Points when creating isometric drawings and specify to Replace Break Points on the command line, old break points are both ignored and removed.
- Add Start Points
-
Adds the start point to the 3D model.