Change the instance properties of a wall sweep to specify its level (if horizontal), its offset from the wall and the level, and more.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Constraints | |
| Offset From Wall | The distance from the wall face. |
| Level | The level of the wall sweep. This property only appears for horizontal wall sweeps. |
| Offset From Level | The wall sweep’s offset from the level. This property only appears for horizontal wall sweeps. |
| Orientation | The orientation of the sweep. Select Perpendicular to Face or Parallel to Ground.
Note: After creating a wall sweep, deselect the sweep, click away, and reselect the sweep to display the parameter. See
Troubleshooting: Cannot Find an Instance Parameter.
|
| Dimensions | |
| Length | The length of the wall sweep. This is a read-only parameter. |
| Identity Data | |
| Comments | Enter comments for the wall sweep. |
| Mark | A value to designate the particular wall sweep. This value must be unique for each wall sweep in a project. Revit warns you if the number is already used but allows you to continue using it. You can see the warning using the Review Warnings tool. See Reviewing Warning Messages. |
| Phasing | |
| Phase Created | The phase when the wall sweep was created. |
| Phase Demolished | The phase when the wall sweep was demolished. |