Modify Settings in Revit.ini

In the Revit.ini file, the settings in the [Modify] section control options bar settings for tools on the Modify ribbon tab.

Align_Multiple

Controls if you are able to aling more than one element to the aligning plane. Align Elements

Type = integer

Valid values: 0 = disable (default), 1 = enable

Array_Constrain

Controls if the arrayed elements are constrained to the work plane. Create a Linear Array

Type = integer

Valid values: 0 = disable (default), 1 = enable

Array_GroupAndAssociate

controls if the array tool creates a group out of the arrayed elements. Create a Linear Array

Type = integer

Valid values: 0 = disable (default), 1 = enable

Array_MoveTo2nd

Controls if the array spacing is based on the position of the 2nd element in the array. Create a Linear Array

Type = integer

Valid values: 0 = disable, 1 = enable (default)

Mirror_Copy

Controls if the mirror tool creates a copy of the selected element when used. Mirror Elements

Type = integer

Valid values: 0 = disable (default), 1 = enable

MoveCopy_Constrain

Controls if the selected element is constrained to the work plane before it is moved or copied. Move Elements with the Move Tool or Copy Elements with the Copy Tool

Type = integer

Valid values: 0 = disable (default), 1 = enable

MoveCopy_Disjoin

Controls if the selected element is disjoined before it is moved or copied. Move Elements with the Move Tool or Copy Elements with the Copy Tool

Type = integer

Valid values: 0 = disable (default), 1 = enable

Offset_Copy

Controls if the offset tool creates a copy of the selected element when used. About Load Autodesk Family

Type = integer

Valid values: 0 = disable, 1 = enable (default)

Offset_GraphicMode

Controls if the offset tool is used in the graphic mode. Move or Copy Elements with the Offset Tool

Type = integer

Valid values: 0 = disable (default), 1 = enable

Offset_Offset_Imperial

Controls the distance used when offsetting based on a numerical value. Move or Copy Elements with the Offset Tool

Type = number

Rotate_Copy

Controls if the selected element is copied from the original element. Rotate Elements

Type = integer

Valid values: 0 = disable (default), 1 = enable

Rotate_Disjoin

Controls if the selected element is disjoined before it is rotated. Rotate Elements

Type = integer

Valid values: 0 = disable (default), 1 = enable

Scale_GraphicMode

Controls if the scale tool is used in the graphic mode. Scale Graphically

Type = integer

Valid values: 0 = disable, 1 = enable (default)

Scale_Scale

Sets the multiplier used when scaling based on a numerical value. Scale Numerically

Type = number

Split_DeleteInnerSeg

Controls if the segments between clicked points are deleted when using the split tool. Split Elements

Type = integer

Valid values: 0 = disable (default), 1 = enable

SplitJointGap_Imperial

Controls the size of the gap between wall segments when using split with gap tool. Split Walls with a Defined Gap

Type = number

Valid values: 1/16th" to 1'-0" (Imperial)

Example

[Modify]
Align_Multiple=1
Array_Constrain=1
Array_GroupAndAssociate=0
Array_MoveTo2nd=0
Mirror_Copy=0
MoveCopy_Constrain=0
MoveCopy_Disjoin=1
Offset_Copy=0
Offset_Offset_Imperial=2
Rotate_Copy=1
Rotate_Disjoin=1
Scale_GraphicMode=0
Scale_Scale=3
Split_DeleteInnerSeg=1
SplitJointGap_Imperial=0.1666666667