IFC Export Setup Options

Configure settings for exporting a model to an Industry Foundation Classes (IFC) file.

To customize setup properties for exporting a model to IFC, modify the "In-Session Setup" option or duplicate a built-in setup and modify the settings as required. The changes you make to the In-Session Setup are not saved between sessions.

Note: If you open a model in Revit LT that was created using Revit, you can see, modify, and export elements (masses, MEP elements, and some structural elements) that cannot be created using Revit LT .

The following table displays the options available on each tab in the Modify Settings dialog.

Option	Description
General
IFC version	IFC 2x2 Coordination View The older IFC 2x2 schema, using the Coordination View model definition. IFC 2x3 Coordination View The older certified version of export, used by older product versions, based on the IFC 2x3 schema and the Coordination View model view definition. IFC 2x3 Coordination View 2.0 The default certified version of export, and the latest version generally supported by other systems, based on the IFC 2x3 schema and the Coordination View 2.0 model view definition. IFC 2x3 GSA Concept Design BIM 2010 Standard IFC 2x3 used for submitting files to the US Government Services Administration. Additional property sets will be included. IFC 2x2 Singapore BCA e-Plan Check IFC 2x2 used for submitting files to the Singapore BCA e-Plan Check Server. When exporting to this file type, ensure that all room-bounding elements are selected. IFC2x3 Basic FM Handover View IFC 2x3 that follows the general requirements to enable the handover of facility management information, used primarily in Bavaria. IFC2x3 COBie 2.4 Design Deliverable View IFC COBie (Construction Operations Building Information Exchange) format output required by the UK government's 2016 Level 2 BIM mandate for collaboration on public-sector work. IFC4 Reference View The newest version of IFC defined by buildingSMART. Intended as a reference model which is not modified. See https://technical.buildingsmart.org/. IFC4 Design Transfer View The newest version of IFC defined by buildingSMART. With this option, Revit LT will attempt to create ifcAdvancedBReps in some cases. This can reduce file size and time to export. See https://technical.buildingsmart.org/.
Exchange Requirement
File type	IFC IFC XML Zipped IFC Zipped IFC XML
Phase to export	Selects the phase of the document to export, defaulting to the last phase of the document. If "Export only elements visible in view" is selected on the Additional Content tab, the phase of the view is used and this option is disabled.
Space boundaries	The level of room/space boundaries exported: None - room/space boundaries are not exported. 1st level - the room/space boundaries are included but are not optimized to split elements with respect to spaces on the opposite side of the boundary. 2nd level - the room/space boundaries are included and are split with respect to spaces on the opposite side of the boundary. A second level space boundary considers the material of the building element and the adjacent spaces behind it, providing thermal properties, for example.
Split Walls and Columns by Level	Allows you to divide multi-level walls and columns by level. When you use this option, Revit LT cuts the walls and columns by each level that is defined as a building story (see Level Instance Properties). Revit LT exports elements whose base level is a non-building story level using the next lower building story as the base level, with an appropriate offset. Revit LT only exports levels for which the Building Story parameter is enabled, unless no levels are defined as building stories. In that case, Revit LT exports all levels that are used as base levels for walls and columns.
File Header Information	Opens the File Header dialog, which allows you to enter author and organization information.
Project Address	Opens the Project Address dialog, which allows you to provide information about the project purpose and location. Select the "Update project information" option to save the information to the project.
Additional Content
Export 2D plan view elements	Select this option to include 2D elements supported by IFC export (notes and filled regions). Clear the option to exclude these elements.
Export linked files as separate IFCs	Select this option to export Revit LT links in the model as separate IFCs. Clear this option to exclude Revit LT links. Each linked instance in the file is exported as a separate IFC file with the correct positioning relative to the host file. Multiple instances of the same linked document are exported as separate files, identical except for their position and orientation. Note: Linked IFC files are re-exported, so they may suffer data loss on roundtrip.
Export only elements visible in view	Select this option to export only the visible elements of the current view. Visible elements include those that are hidden by hidden line or shaded mode, any underlays in the view, and elements that are cropped from view by the crop region. Elements temporarily hidden using temporary hide/isolate are not exported. Categories marked as Not Exported in the IFC Export Classes dialog are not exported. See Load and Modify an IFC Mapping File. Clear the option to export the entire model.
Export rooms in 3D views	If the "Export only elements visible in view" option is selected, selecting this option exports all rooms contained inside the section box of the selected 3D view. If there is no active section box, all rooms are exported.
Property Sets
Export Revit property sets	Select this option to include the Revit LT-specific property sets based on parameter groups. Clear the option to exclude them.
Export IFC common property sets	Select this option to include the IFC common property sets. Clear the option to exclude them.
Export base quantities	Select this option to include base quantities for model elements in the export data. Base quantities are generated from model geometry to reflect actual physical quantity values, independent of measurement rules or methods.
Export schedules as property sets	Select this option to export schedules as custom property sets. The name of the schedule is the property set name; the column names are the IFC parameter names.
Export only schedules containing IFC, Pset, or Common in the title	When selected, restricts the schedules exported to only those that contain "IFC," "PSet," or "Common," in the title.
Export user defined property sets	Select this option to export user-defined property sets. If selected, you can specify the name of a text file that contains property set definitions.
Export parameter mapping table	Select this option to export a custom parameter-mapping table. If selected, you can specify the name of a text file that contains parameter mapping.
Classification Settings	Opens the Classification Settings dialog, which allows you to provide information about the source and edition of the project.
Level of Detail
Level of detail for some element geometry	These options allow you to control the level of tessellation for some Revit LT elements. Selecting Medium or High for this option generally results in larger, but more accurate, BRep and profile representations. The main Revit LT elements affected by this control are: elbows, floors, pipe fittings, railings, ramps, spaces, and stairs. Highly-detailed extrusion profiles are also affected for these items. Extra Low Low Medium High
Advanced
Export parts as building elements	Select this option to export parts as standard IFC elements. Clear the option to export them as IfcBuildingElementPart.
Allow use of mixed "Solid Model" representation	Select this option to allow for mixing BRep and extrusion geometries for an entity. This can result in smaller IFC files, but the files are not strictly within the standard IFC MVDs.
Use active view when creating geometry	Select this option to use the active view to generate the exported geometry. Note that this can have unexpected results if used on a non-3D view.
Use family and type name for reference	Select this option to use the family and type name for references. Clear the option to use the type name only.
Use 2D room boundaries for room volume	Select this option to use a simplified approach to calculation of room volumes (based on extrusion of 2D room boundaries) which is also the default when exporting to IFC2x2. Clear the option to use the Revit LT calculated room geometry to represent the room volumes (which is the default when exporting to IFC2x3).
Include IFCSITE elevation in the site local placement origin	Select this option to include the elevation from the Z offset of the IFCSITE local placement. Clear the option to exclude it.
Store the IFC GUID in an element parameter after export	Select this option to store the generated IFC GUIDs in the project file after export. This will add "IFC GUID" parameters to elements and their types, and Project Information for Project, Site, and Building GUIDs.
Export bounding box	Select this option to export bounding box representations. Clear the option to exclude them. This option is automatically selected for GSA export.
Keep Tessellated Geometry as Triangulation	Select this advanced option to use a triangulation method that is compatible with older IFC 4 Reference View viewers.
Use Type name only for IFCType name	Use this option to export IfcType name to use only Revit type name without the family name.
Use visible Revit name as the IFC Entity name	Use this option to export Ifc Entity nameto use the visible Revit name.
Entities to be included/excluded from export	Use the dialog to select the IFC entities that will be exported. Check all entities to include in the exported file. Use the Search tool in the dialog to help locate specific IFC entities within the schema.
Geographic Reference
Project Site
Coordinate Base	Set the position of the export Eastings, Northings, Elevaiton and Angle from True North values will be adjusted based on the selected Coordinate Base. Shared Coordinates Survey Point Project Base Point Internal Origin Project Base Point oriented in True North Internal Origin oriented in True North
Projected Coordinate System Reference