Add a building pad by sketching a closed loop on a toposurface.
Video: Create a Building Pad- Open a site plan view.
- Click Site tab
Modify Site panel
(Building Pad).
- Use the drawing tools to sketch the building pad as a closed loop.
- On the Properties palette, set the Height Offset From Level and other building pad properties as needed.
Tip: To see the building pad in a floor plan view, set the building pad offset to a value higher than Level One, or adjust the view range.
Example
Sketch pad in a plan view. See pad element interacting with the toposurface in a 3D view.
