To see or change boundary line properties for sloped surfaces, select a boundary line and see the Properties palette.
When creating or editing a boundary line for the following elements, you can define the slope of the surface by changing properties of the line on the Properties palette:
Name | Description |
---|---|
Constraints | |
Level |
Indicates the level with which this line is associated. |
Defines Slope | Indicates that the selected boundary line is one edge of a sloped surface. This property is active only when Defines Constant Height is selected. |
Defines Constant Height |
Specifies whether the entire line is at the same height in relation to its associated level. |
Offset from Base |
Specifies the distance this line is offset from its associated level. To start below the level, enter a negative number. This property is active only when Defines Constant Height is selected. |
Graphics | |
Center Mark Visible | If the boundary line is an arc, specifies whether the center mark for the arc displays. You can dimension to the center mark of an arc. |
Dimensions | |
Slope | Specifies the pitch (rise/run) of the sloped surface. This property is active only when Defines Slope is selected. |
Length |
Indicates the actual length of this line. (Read-only) |