Use this tab to specify the profile design criteria settings, including the design criteria file and design check set.
- Alignment
-
Specifies the horizontal alignment along which to create the profile.
- Name
-
Specifies the name of the profile. Each profile must have a unique name.
- Description
-
Specifies an optional description of the profile.
Use Criteria-Based Design
Specifies whether to apply design criteria to the profile. If this check box is cleared, then the Use Design Criteria File and Use Design Check Set options are not available.
Use Design Criteria File
- Use Design Criteria File
-
Specifies whether to associate a design criteria file with the profile. If this check box is cleared, then the design criteria file selector and Default Criteria table are not available.
- Design Criteria File Selector
-
Specifies the design criteria file to associate with the profile. The design criteria file that is applied to the parent alignment is displayed by default. Click
to select another design criteria file. - Default Criteria Table
-
Displays the profile standards formulas that are defined in the selected design criteria file. Click the Value column to change a criteria table.
Use Design Check Set
- Use Design Check Set Check Box
-
Specifies whether to associate a design check set with the profile. If this check box is cleared, then the Design Check Set list is not available.
- Design Check Set List
-
Displays the default design check set. You can either accept the default design check set, or use the list to select a different one from the drawing.
-
Design Check Set Selection -
Edits or copies the current design check set, or creates a design check set.