Use this dialog box to select the plots or survey figures to include in a map check report. This report displays the directions and distances, start and end coordinates, curve data, perimeter, and area, and calculates the error of closure.
List of Objects
-
Plots
-
Select this option to report on plots in the drawing. When you select this option, the plots in the current drawing are listed in the table below.
-
Survey Figures
-
Select this option to report on survey figures.
Note: The Survey database in the drawing must be open to report on figures.
-
Include
-
Select the individual plots or figures to include in the report by selecting the check boxes. Use this option to select an individual plot to change the Start Point (SP) (see below).
-
Select All
-
Selects all plots or figures for the report.
-
Deselect All
-
Clears the current selection of plots or figures.
Analysis
Note: All options in the Analysis section are available for plot reports only and are unavailable if you select the Survey Figures option.
-
Start Point
-
If only one plot is selected in the list above, its Start Point X,Y values are displayed here. You can click the icon to specify a different start point to use in the report.
Note: The Start Point (SP) X,Y values are not displayed if more than one plot is selected in the list above. If you change the SP for one plot, the change is not saved if you select another plot in the list. Changes are not saved to the plot in the drawing.
-
Process Segment Order Counterclockwise
-
- Selected: Segments are processed in counter-clockwise order.
- Cleared: Segments are processed in clockwise order.
-
Enable Mapcheck Across Chord
-
- Selected: The mapcheck traverse is calculated for curve segments using their chord length.
- Cleared: The mapcheck traverse is calculated for curve segments using their curve length.
- Truncate Area (Square Unit)
-
- Selected: The area values output are limited to the specified number of decimal places in the Plot Area Precision settings without rounding. For example, if the area of a plot is 43,559.989 square feet and the Area precision is set to 2, then the value will be truncated to 43,559. 98 (it will not be rounded up).
- Cleared: The area values output are rounded based on the Plot Area Rounding settings.
Settings
- Plot Settings
-
Displays read-only settings for plots, as specified in the Plot settings.
- Figure Settings
-
Displays read-only settings for survey figures, as specified in the Survey settings.
Report Settings
- Save Report To
-
Specifies the name and location of the resulting report.