Click the New button on the Signs page or select the required sign location from the expanded list. The Sign Location page is displayed.
Enter the Name of the sign location. This is the name that is displayed in the list of signs and must be unique.
Select the Position from the drop down list. Signs may be positioned On Approach Road, On Departing Road, On Centre Island Opposite Arm, On Centre Island Between Arms or On Centre Island Opposite Entry.
Signs are positioned relative to road features so that when the road geometry changes the signs can be adjusted too.
Lateral Offset is measured across the direction traffic flow and may be measured Offset From Nearside Kerb, Offset From Offside Kerb, Offset From Centreline or Centred On Road.
Longitudinal Offset is measured in the direction of traffic flow and may be measured Offset From Yield Line, Offset From Crossing, Offset from Crossing Then Yield Line, Offset From Centre Of Roundabout.
Post Height is measured from ground level at the base of the post. Note that if you place a sign higher than the specified post height the post will be extended automatically.
Signs on approach or departing roads are aligned to the road alignment at the sign offset by default. Signs on the centre island are aligned to face directly outwards radially by default.
To rotate all the signs at this location, set the Angular Adjustment. This is measured positive anti-clockwise.
By default signs have a single post centred on the sign width. To specify multiple posts, enter the Number of Posts and the Post Spacing.
Select Show 2D Images to place true-scale images of the signs adjacent to the sign post oriented to the direction they face.
Select Show 2D Callout to display an enlarged view of the signs at a separate location connected with a leader line. The location of this view can be adjusted with a grip.
To add a sign at this location, click Add Sign.
To delete all signs at this location, click Delete.