About Cant Warnings

View warning messages that indicate issues that cause inaccurate cant calculations.

When an issue that affects the cant calculation is detected, may be displayed in a number of places. In most instances, the displays information about the warning when the cursor is hovered over it.

Cant View

Problem	Solution
Overlapping critical chainages	Resolve the overlap condition.

Cant Tabular Editor

Problem	Solution
Overlapping critical chainages	Resolve the overlap condition.

Cant Curve Manager

Problem	Solution
Alignment geometry violates the specified design criteria	View and correct alignment design violations.
Cant data is out of date	Verify the cant data, and then recalculate cant.
Design speed has changed	Verify the design speed, and then recalculate cant.
Track width has changed	Verify the track width, and then recalculate cant.

Alignment Geometry (Plan View)

Problem	Solution
Alignment geometry violates the specified design criteria	View and correct alignment design violations.
Design speed has changed	Verify the design speed, and then recalculate cant.
Track width has changed	Verify the track width, and then recalculate cant.

Event Viewer

Problem	Solution
Alignment type does not match assembly type When building a railway corridor, the alignment Type must be set to Rail and the Assembly Type must be set to Railway.	Change either the alignment type or assembly type.