Use this tab to set volume table properties for the section view.
Use the following controls to specify the volume table types to draw:
- Type
-
Specifies the type of the volume table(s).
- Select Table Style
-
Specifies the style of the volume table. Standard buttons are also provided to create or edit a label style.
- Add >>
-
Adds a volume table to the list.
List Of Volume Tables
- Table Type
-
Displays the current table type.
- Style
-
Specifies the name of the table style that was added using the Select Table Style list. To change the style, click in this column to open the Select Style dialog box. Select a band style in the list or use the standard controls to create a new style, copy or edit the current style selection, or pick a style from the drawing.
- Material List
-
Specifies the material list for the volume table.
- Materials
-
Click
to specify the materials for the volume table. - Layer
-
Specifies the drawing layer that contains the sampled source.
- Split
-
Specifies whether the layer is split.
- Gap
-
Specifies the distance in plotted units between the current data box and the previous data box (or the nearest section view axis). Enter a positive gap value in plotted units.
- Reactivity Mode
-
Specifies the type of update mode for the section. Select Dynamic to specify that the cross section updates dynamically if the position of the sample line associated with the section changes or the data source (surface, corridor, or pipe) geometry changes.
Position Of Table(s) Relative To Section View
- Section View Anchor
-
Specifies the section view anchor (Top/Middle/Bottom, Left/Center/Right).
- Table Anchor
-
Specifies the location of the table anchor (Top/Middle/Bottom, Left/Center/Right).
- Table Layout
-
Specifies whether the layout of the tables will be horizontal or vertical, in relation to the section view.
- X Offset
-
Specifies the distance in plotted units to move the title away from the position set by the table anchor. Enter a positive number to move the title right, or a negative number to move it left.
- Y Offset
-
Specifies the distance in plotted units to move the title away from the position set by the table anchor. Enter a positive number to move the title up, or a negative number to move it down.