To Work with Pressure Networks in Section Views

You can display pressure network parts in section views and in the Corridor Section Editor.

To represent pressure network parts in a section view

1. Make sure the pressure network parts you want to display in the section view have already been created in plan view and have valid chainage offset data associated with them.
2. Create the desired sample lines and section views. The procedure is similar to the procedure for creating surface sections.

   Only the pressure network parts that cross the sample lines are displayed in the section views.

To view pressure network parts in the Corridor Section Editor

1. In a drawing with a corridor and a pressure network, right-click the corridor and click Modify Corridor Sections Corridor Section Editor.
   Note: Pressure pipes are displayed by default in the Corridor Section Editor. For more information, see To View Corridor Sections.
2. Use the navigation tools to navigate through the sections.
   Note: You can modify how the pressure pipes appear in the Corridor Section Editor by modifying the Section options on the Display tab of the Pressure Pipe Style dialog box.