About Point Location Commands

The following table lists the point location-related Autodesk Civil 3D survey commands and briefly describes their functionality.

Note: These commands must be entered in the Survey Command Window. For more information, see Survey Command Window.

Command	Description
AZ [point 1] [point 2] [whole circle bearing]	Determines the whole circle bearing between two points
B [point1] [point2] [quadrant bearing] [quadrant]	Defines a quadrant bearing between two points
BS [point] (orientation)	Locates a point by backsight
STN [point] (instrument. height) (description)	Creates a new setup station