To Renumber Points

Use the Renumber command to assign new point numbers to selected drawing points.

This command adds an integer value to the point number of each selected point.

You may be prompted to resolve any numbering conflicts that arise when the renumbering occurs.

To renumber project points, check the points out of the project into a drawing, renumber them using the Renumber command, and then check them back in to the project.

1. In Toolspace, on the Prospector tab, click the Points collection to display the Points list view.
2. In the list view, select the desired points. For more information, see To Work With Toolspace List Views.
3. Right-click and click Renumber.
4. Enter the value to be added to the point number of the selected points.