You can use the At Alignment Geometry command to create a point at every geometry point on an alignment.
Geometry points are points of curvature (PC), tangent points (TP), transition-curves (TC), curve-transitions (CS), straight transitions (ST), transition-straights (TS), and intersection points (IP).
When creating points using this command, you are not prompted for a description if the Prompt For Descriptions Points Creation setting is set to Automatic-Object. The raw and full description for the point is automatically assigned based on the type of point created. The assigned description displays in the drawing if the current point label style contains a raw description or a full description text component.
The following table describes alignment vertex labels that are created and the description that is assigned based on the point type:
|
Created Label |
Definition |
|---|---|
|
BOA |
Beginning of Alignment |
|
IP |
Intersection Point |
|
CIP |
Curve Intersection Point |
|
TP |
Tangent Point |
|
PC |
Point of Curvature |
|
TIP |
Transition Intersection Point |
|
ST |
Straight-Transition intersection |
|
CS |
Curve-Transition intersection |
|
ST |
Transition-Straight intersection |
|
CC |
Curve Center or radius point |
|
EOA |
End of Alignment |
Point settings, styles, layers, point groups, and description keys can all affect how a point is created or how it is displayed in the drawing.