To Change the Levels of Points

Change the levels of a point and changing the levels of a point, point group, or a selection of drawing points based on the levels in a selected surface.

To change the level of points

1. In Toolspace, on the Prospector tab, click the Points collection to display the Points list view.
2. In the list view, select the desired points. For more information, see To Work With Toolspace List Views.
3. Right-click and click Datum.
4. In response to the prompt, specify a change in level by doing one of the following:
   • Enter a change in level. To specify a decrease in the level, use a minus sign (-) before the value.
   • Enter R, for reference, then enter the old and new datum levels. The points will be modified by the differences between the two values.

The levels of the selected points is based on their location on the surface.

To change the level of points based on a surface

1. In Toolspace, on the Prospector tab, click the Points collection to display the Points list view, or right-click a Points collection and select Edit Points to display the Point Editor.
2. Do one of the following to display the Select Surface dialog box:
   • Select the points to edit in the list view or the Point Editor and right-click Levels From Surface.

     or

   • Click COGO Point tabModify panelLevels From Surface Find.
3. Select a surface from the list and click OK. If you selected the command from the list view or the Point Editor, the Point Level column reflects the level from the surface. If you selected the command from the Points menu, you are prompted at the command line to select one of the following:
   • All: to select all points in the current drawing to move levels to the selected surface.
   • Numbers: prompts the user to specify a range of numbers.
   • Group: displays the Point Groups dialog box where you can select a point group.
   • Selection: prompts the user to select points in the drawing.