Autodesk Stone

This material has the appearance of stone.

• Material/Map Browser > Materials > Autodesk > Autodesk Stone
Note: The material appears in the Material/Map Browser only if the active renderer supports it.

The walls use tiles of Autodesk Stone.

Interface

Stone rollout

Image

Click to choose a bitmap that defines the surface appearance of the stone material.

Finish

Sets the finish used for the stone surface.

• Polished (The default.)
• Glossy
• Matte
• Unfinished

Finish Bumps rollout

Enable

When on, the material uses a bump pattern for its finish. Default=off.

Type

Lets you choose a preset pattern for the bump pattern, or choose a custom pattern.

• Polished Granite (The default.)
• Stone Wall
• Glossy Marble
• Custom
  

  Click the Image button (or use Slate Material Editor node wiring) to assign a map to the material.

Amount

Controls the height of the finish bumps. Range: 0.0 to 1.0. Default=0.05.

Relief Pattern rollout

Enable

When on, applies a relief pattern to the material. Default=off.

Image

Click to specify a bitmap for the relief pattern.

Amount

Controls the height of the relief. Range: 0.0 to 2.0. Default=0.15.