Parameters tab

On this tab of the properties dialog box, you can set the clearances between the beams.

1. Distance web	Defines the distance between the webs of the two beams.
2. Distance flange, inner	Defines the cope distance to the inner side of the floor beam flange.
3. Distance flange, side	Defines the distance between the outer side of the floor beam flange and the processed beam.
4. Radius	Defines the radius at the cope corner.
Cut parallel	If selected, the secondary beam is cut perpendicularly; otherwise, it creates a cut parallel to the main beam.
Alignment	Select the cope alignment.
Align	The secondary beam is cut parallel to the main beam.
Perpendicular	The secondary beam is cut perpendicular.
Orientation	Select the cope orientation.
Horizontal	The cope is aligned horizontally.
Sloped	The cope is aligned according to the secondary beam slope.
Corner finish	Different corner finishes are available: convex, concave, and straight. Then the corner size is set. Select none for a rectangular stiffener plate.
Corner position	Select where to create the corner finish: Top and bottom - corner finishes are created at the top and bottom side of the secondary beam. Top - a corner finish is created at the top side of the secondary beam. Bottom - a corner finish is created at the top side of the secondary beam.
5. Corner size	Defines the corner size.