Saw cut Properties - Cut tab

Saw cut - Flange

Cut	Select the side of the main beam Front - on the front side of the main beam Rear - on the back side of the main beam
Gap	Defines the construction gab between the beams.
Switch side
Straight cut	Cuts the beam vertically. Otherwise, the second beam is cut parallel to the first beam.
Create weld	Creates a weld between the two beams.
2. Weld thickness	Defines the weld thickness.

Saw cut - Web

On this tab of the properties dialog box, you can set the clearance between the beams.

Gap	Defines the construction gab between the beams.
Bisecting line	When selected, the intersection of the beams is created at the bisecting line.
Create weld	Creates a weld between the two beams.
2. Weld thickness	Defines the weld thickness.