To Specify the Display of Frames for a Window

Use this procedure to change the frame display for a window in the Plan High Detail display representation.

1. Double-click the window.
2. Click the Display tab on the Properties palette.
3. Under the General category, for Display component, verify that *NONE* is selected.
4. For Display controlled by, select This object.
   Note: To apply your changes to all windows in the drawing, select Drawing default setting. To apply changes to all windows of this style, select Window Style:<style name>.
5. For Display representation, select Plan High Detail.
6. If necessary, expand Object Display Properties Advanced, and click Frame display.
7. On the Frame Display worksheet, under Type, select either Standard or Offset.
8. For A-Extension, enter a value to indicate the distance you want the frame to extend.
9. Click OK.

You can also access and modify frame display settings through the window’s context menu, as follows:

1. Select the window you want to change, right-click, and click Edit Object Display.
2. Click the Display Properties tab.
3. Select the Plan High Detail display representation, and select Object Override.

   The display representation in bold is the current display representation.

4. If necessary, click .
5. Click the Frame Display tab.
6. Adjust the settings as desired, and click OK twice.