To Add Sunburst Pattern Muntins to a Window Style

Use this procedure to add sunburst muntins to a window style.

You add the muntins by editing the display properties of the window style for a display representation, such as Model or Elevation, where you want the muntins to appear. You can add muntins to display representations individually. You can also add muntins to a single display representation and automatically apply the muntins to all display representations of that window style. You add the muntins block to the window style in the display properties. Each muntins block becomes a display component of the window style.

You can add the sunburst pattern only to the top window sash. You can apply the sunburst pattern to window shapes with a round, half round, or quarter round top.

You can apply the sunburst pattern to the following window types: awning, single hopper, single transom, vertical pivot, horizontal pivot, double hung, glider, single hung, single casement, and picture.

Specifying sunburst pattern muntins

1. Click Manage tabStyle & Display panelStyle Manager.
2. Expand Architectural Objects, and expand Window Styles.
3. Select the style you want to edit.
4. Click the Display Properties tab.
5. Select the display representation where you want the changes to appear, and select Style Override.
6. If necessary, click .
7. Click the Muntins tab.
8. Click Add.
9. Enter a name for the muntins block.
10. Under Window Pane, select Top.
    Note: The Sunburst pattern is available only when Top is selected for Window Pane.
11. Enter a value for the width of all muntins.
12. Enter a value for the depth of all muntins.
13. Clean up the muntin intersections:

    If you want to…	Then…
    convert the muntin intersections to corners	under Muntin, select Clean Up Joints.
    convert all the muntins to one body with the joints cleaned up	under Muntin, select Convert to Body.

    

    Specifying sunburst muntin cleanup joints

14. Under Lights, select Sunburst for Pattern.
15. Enter a value for Lights High to specify the number of light rows in a vertical direction.
16. Enter a value for Lights Wide to specify the number of panes in the radial direction.
17. Enter a value for Spokes to specify the number of radial muntin spokes.
    

    Specifying number of spokes for sunburst muntins

18. Under Hub Style, select Closed for no hub pane, or select Open for a hub pane.
    

    Specifying sunburst muntin open and closed hubs

19. Enter a value for Radius to specify the radius for the hub.
    

    Specifying sunburst muntin hub radius

20. Click OK.
21. Add additional muntins:

    If you want to add muntins to…	Then…
    another window sash in the window style	repeat this procedure from step 8.
    another display representation	click OK, and repeat this procedure from step 5.
    all display representations of the selected window style	select Automatically Apply to Other Display Representations and Object Overrides.

22. Click OK three times.

After you add a muntins block to a window style, you can assign a material, such as wood, and specify display properties, such as color and linetype, for the muntins.