To Change the Cut Plane Setting for a Window

Use this procedure to specify whether a selected window will use the cut plane of the containing object when anchored to that object in the current display representation. Note that cut plane display properties apply only to display representations, such as Plan, that are used in the Top view (plan view) of a drawing.

1. Double-click the window.
2. Click the Display tab.
3. Under the General category, for Display component, verify that *NONE* is selected.
4. For Display controlled by, select This object.
   Note: To apply your changes to all windows in the drawing, select Drawing default setting. To apply changes to all windows of this style, select Window Style:<style name>.
5. For Display representation, verify that the desired display representation is selected.
6. If necessary, expand Object Display Properties Cut Plane.
7. For Use cut plane of containing object when anchored, select Yes or No.