Use this procedure to change the angle of the sides of the building elevation boundary. You can change the angle dimensions before or after you create a connected elevation. If you change the angles after creating the elevation, you need to update the elevation to show the changes.
- Double-click the elevation line you want to change.
- On the Properties palette, expand Basic
Component Dimensions. - Specify values for Angle 1 and Angle 2.
These values define the angles of the two sides from the elevation line to create the elevation box. The apex of Angle 1 is the start point of the elevation line. The apex of Angle 2 is the endpoint of the elevation line. Values for these angles must be between 0 and 90 degrees.
Specifying section angle parameters
- Right-click, and click Deselect All to turn off grips.