To Specify the Cut Plane Height of a Slab/Roof Slab Style

Use this procedure to specify the cut plane height of a slab or roof slab style.

If the value you specify for the cut plane height is greater than zero, you must specify the layer, color, and linetype for the elements above and below the cut plane height. This is especially important when interference conditions or body modifiers are present.

1. Open a tool palette that has a slab or roof slab tool, right-click the tool, and click Slab Styles or Roof Slab Styles.
   Note: Alternatively, you can select a slab or roof slab in the drawing, and click Slab Styles or Roof Slab Styles from the Edit Style drop-down on the General panel of ribbon’s contextual menu.
2. Select the style you want to edit.
3. Click the Display Properties tab.
4. Select the display representation in which to display the changes, and select Style Override.
5. If necessary, click .
6. Click the Other tab.
7. Select Override Display Configuration Cut Plane, and enter a value for Cut Plan Height.
8. Click OK twice.