Adds a door of the same style as the last one added.
You can change the style of door to be added on the design tab of the properties palette after clicking this button.
The following prompts are displayed.
Specify style to control the appearance of the door objects
Specify the thickness of the door.
Specify the height of the door.
Specify the head height of the door.
Specify the threshold height of the door.
Select a door to match.
Specify as point to switch the insertion point of the door from hinge (default) to center and latch.
Specify a point to measure the insertion point of a door in relation to a specified point in the drawing.
Specify the offset from the wall end during insertion if you have chosen Offset/Center for Position along wall
Specify alignment to place of doors
Insert doors relative to grid.
Specify multiple placement of doors.