To Create an Unbounded Hatch

1. At the Command prompt, enter -HATCH.
2. Enter p to specify Properties.
3. Enter the name of the pattern. For example, enter earth to specify the EARTH pattern.
4. Specify the scale and angle for the hatch pattern.
5. Enter w to specify Draw Boundary.
6. Enter n to discard the polyline boundary once the hatch area has been defined.
7. Specify points to define the boundary. Enter c to close the polyline boundary.
8. Press Enter twice to create the hatch.

Note: You can also erase the boundary objects of an existing hatch, or trim an existing hatch to objects that cross the hatch edges.