Wire Tagging Dialog Box

Inserts wire numbers as specified in drawing properties.

Find

 Command entry:  AEWIRENO

Wire numbers are blocks with attributes inserted on a line wire entity. There are four types of wire numbers: Normal, Fixed, Extra, and Signal. The AutoCAD Electrical toolset application assigns each wire number type to its own layer. You can assign different colors to these layers.

AutoCAD Electrical toolset processes wire line entities into wire networks, and inserts or updates wire numbers associated with them.

To do	Specifies to process all the wiring or just the untagged (new) wires.
Wire tag mode	Specifies to use the sequential or line-reference based setting for the drawing.
Format override	Specifies the wire tag format to use for overriding the format set in the Drawing Properties dialog box.
Use wire layer format overrides	Overrides the default wire number format (set in the Layers section of the Drawing Properties Drawing Format dialog box) by using layer-defined formats.
Insert as fixed	Forces all wire numbers to be fixed (they do not update if wire number retagging is run again at a later date).
Cross-reference Signals	Updates cross-reference text on wire signal source and destination symbols.
Freshen database (for Signals)	Updates the database for wire signal source and destination symbols.
Project-wide	Tags or retags wiring project-wide.
Pick individual wires	Tags or retags the selected wiring on the current drawing only.
Drawing-wide	Tags or retags wiring on the current drawing.