To Work With Internal Jumpers

Add and edit internal wire jumpers which jumper between terminals on a component.

Add Internal Wire Jumpers

1. Click Schematic tabEdit Components panelEdit Components drop-downInternal Jumper. Find
2. Select the component.
3. Select terminals from the list.

   Drag your mouse to select contiguous terminals or use the CTRL button to select noncontiguous terminals.

4. Click Add.

Add Internal Wire Jumpers by Picking

1. Click Schematic tabEdit Components panelEdit Components drop-downInternal Jumper. Find
2. Select the component.
3. Click Pick. The dialog closes. You can select as many terminals as you want.

   Try to select as near the terminal as you can since AutoCAD Electrical toolset finds the closest connection terminal to your selected point.

4. After you select the terminals, press Enter and the dialog displays.

   Notice that the selected terminals are highlighted in the list.

5. Click Add to finish defining the jumper.

Change an Existing Jumper Assignment

1. Click Schematic tabEdit Components panelEdit Components drop-downInternal Jumper. Find
2. Select the component.
3. Select the jumper from the list on the right.

   Once selected, the terminals that are part of this jumper assignment are highlighted on the terminal list.

4. Reselect the terminals to be jumpered, using the Shift and CTRL keys as needed.
5. Click Update once the appropriate terminals are highlighted.