PLC Modules Used So Far Data Fields to Report Dialog Box

Specifies which fields to include in the report, the field order, and the field labels.

Find

Command entry: AESCHEMATICREPORT

Select PLC Modules Used So Far from the report list. Run the report and click Change Report Format on the Report Generator dialog box.

List of Options

The following options are displayed.

Available Fields

Lists the available fields for the report, including fields added with the User Attributes command. Select a field from the list to add it to the report.

Fields to Report

Specifies the fields to display in the report, and the field order.

Remove

Removes the selected field from the Fields to Report list.

Remove All

Removes all the fields from the Fields to Report list.

Move Up

Moves the selected field up one spot in the Fields to Report list.

Move Down

Moves the selected field down one spot in the Fields to Report list.

Change Field Name/Justification

Specifies the field label and justification for the selected field.

Note: The vertical justification is used only when the report is inserted as a table.

Available Fields

ADDR_BEG

Beginning address of the PLC module

ADDR_END

Ending address of the PLC module

TAG

PLC module tag value

MFG

Manufacturer or vendor name

CAT

Catalog part number assignment

ASSYCODE

Assembly code value linking the catalog value to subassembly items

LINE1

PLC module's LINE1 attribute description text

LINE2

PLC module's LINE2 attribute description text

INST

Installation value

LOC

Location value

REF

Line reference, X-Y grid reference, or X Zone reference of the PLC module

SH

Sheet value (%S) for the drawing where the PLC module is located

SHDWGNAM

Drawing value (%D) for the drawing where the PLC module is located

SEC

Section value for the drawing where the PLC module is located

SUBSEC

Sub-section value for the drawing where the PLC module is located

DESC

DESC attribute value on the PLC module

HDL

Handle number of the PLC module block

DWGIX

DWGIX value, as listed in FILETIME table of project database, for the drawing where the PLC module is located