To Toggle Selection Cycling for Custom Grips in Dynamic Blocks

1. Click Insert tab Block Definition panel Block Editor. Find
2. At the Block Editor Command prompt, enter BCYCLEORDER.
3. In the Insertion Cycling Order dialog box, select a grip from the list, and click Cycling to turn cycling on or off for the grip. (A check mark in the Cycling column indicates that cycling is turned on for the grip.)
4. Click OK.
5. Click Block Editor tab Open/Save panel Save Block. Find
6. (Optional) If you are finished using the Block Editor, click Close Block Editor.

Note: You can also toggle grip cycling on the Properties palette.