To Import a WMF File

1. At the Command prompt, enter WMFIN.
2. In the Import WMF dialog box, select the WMF file that you want to open.
3. If necessary, change the import options for WMF files.
   1. In the Import WMF dialog box, click Tools > Options.
   2. To import objects without solid fills for wide polylines and solid hatches, select Wire Frame (No Fills).
   3. To maintain the relative line width of imported lines and borders, select Wide Lines
   4. Click OK.
4. In the Import WMF dialog box, click Open.
5. Specify an insertion point for the WMF file.
6. To specify the scaling, use one of the following methods:
   • To specify the X and Y scale factors by picking points in the drawing area, enter c and pick a point in the drawing area. The X and Y dimensions of the box formed by the insertion point and the point you picked become the X and Y scale factors.
   • To specify scale factors for each axis, enter xyz and enter a scale for each axis when you are prompted.
     • To retain the original size of the image, enter 1.
     • To enlarge the image, enter a value greater than 1. For example, specify 2 to double the size of the image.
     • To shrink the image, enter a decimal number between 0 and 1. For example, specify 0.5 to halve the size of the image.
7. Specify the rotation angle.