Dimensional constraints maintain specified distances and angles between geometric objects or points on objects.
For example, you can specify that the length of a line should always remain at 6.00 units, that the vertical distance between two points be maintained at 1.00 unit, and that a circle should always remain at 1.00 unit in diameter.
When you apply a dimensional constraint to an object, a constraint variable is automatically created for maintaining the constraint value. By default, these are assigned names such as d1 or dia1, but you can rename using Parameters command.
Dimensional constraints can be created in one of the following forms:
- Dynamic constraints
- Annotational constraints
The forms have different purposes. In addition, any dynamic or annotational constraint can be converted to a reference parameter.
Dynamic Constraints
By default, dimensional constraints are dynamic. They are ideal for normal parametric drawing and design tasks.
Dynamic constraints have the following characteristics:
- Maintain the same size when zooming in or out
- Can easily be turned on or off globally in the drawing
- Display using a fixed, predefined dimension style
- Position the textual information automatically, and provide triangle grips with which you can change the value of a dimensional constraint
- Do not display when the drawing is plotted
If you need to control the dimension style of dynamic constraints, or if you need to plot dimensional constraints, use the Properties Inspector to change dynamic constraints to annotational constraints.
Annotational Constraints
Annotational constraints are useful when you want dimensional constraints to have the following characteristics:
- Change their size when zooming in or out
- Display individually with layers
- Display using the current dimension style
- Provide grip capabilities that are similar to those on dimensions
- Display when the drawing is plotted
After plotting, you can use the Properties Inspector to convert annotational constraints back to dynamic constraints.
Reference Parameters
A reference parameter is a driven dimensional constraint, either dynamic or annotational. This means that it does not control the associated geometry, but rather reports a measurement similar to a dimension object.
You use reference parameters as a convenient way to display measurements that you would otherwise have to calculate. For example, the width in the illustration is constrained by the diameter constraint, dia1, and the linear constraint, d1. The reference parameter, d2, displays the total width but does not constrain it. The textual information in reference parameters is always displayed within parentheses.
You can set the Reference property in the Properties Inspector to convert a dynamic or annotational constraint to a reference parameter.
You cannot change a reference parameter back to a dimensional constraint if doing so would overconstrain the geometry.