To Modify a Cable Tray or Conduit Fitting

1. Select a fitting.
2. Depending on the selection:
   • For cable tray: click Cable Tray Fitting tab Modify panel Modify Fitting to open the Modify Cable Tray Fitting dialog box.
   • For conduit: On the Properties palette, under General, click the part image to open the Select a Part dialog box.
3. Select Display/Hide additional part parameters to display or hide more information in this dialog box.
   Tip: For cable tray, click Details first to see this option.
4. Modify the fitting:

   If you want to modify…	then for cable tray…	then for conduit…
   the part subtype	select a different subtype in the part type folder. Note: While you can change the part subtype, you cannot change the part type, for example, replace an elbow with a tee.	specify a part from the catalog.
   parameters, such as connection size or type	click the Part Filter tab, and specify the parameters you want to filter from the list of available part sizes. Then select the part you want for Part Size Name.	under Filter by Dimensions, specify the dimensions to filter.
   the size	select a size for Part Size Name, and then select a part from the Part Size Name list.	under Select Part Size, specify a part size.