Creates concentric pitch circles and places a specified number of holes on them, distributed uniformly.
Find
Summary
If required, you can choose to draw the centerline cross only.
List of Prompts
The following prompts are displayed.
Dialog box
Displays the Centerlines dialog box, using which you can change the centerline creation method.
Center point
Specifies the center of the pitch circle.
Specify diameter
Specifies the diameter of the pitch circle. You can specify several values separated by the "|" character, which draws concentric pitch circles for each diameter you specified.
Diameter of hole
Specifies the diameter of the holes to draw on the pitch circle. Enter S to specify that you want to select the hole from the standard part content library. Specify "No hole" to create centerline crosses without the holes.
Centerline cross diameter
Specify the diameter of the centerline cross to place on the hole.