Tip: Use raster snapping to make it easier to pick points on the raster entity you are converting. For more information, see
Specifying Raster Snap Settings.
- On the ribbon, click
Raster Tools tab
Vectorize & Recognize Text panel
Primitives drop-down menu
Arc.
The following prompt is displayed:
Specify one-pick point or [Center/3P]:
- Do one of the following:
- Select a raster arc using the one-pick selection method.
- Enter c (Center), then select a center point, a start point, and an end point to define the arc.
- Enter
3p, then select three points along the radius to define the arc.
The following prompt is displayed:
Specify one-pick point or [Center/3P/Verify center/Radius/Undo]:
- Do one of the following:
- Select another arc to vectorize, using one of the methods described in step 2.
- Enter v (Verify center) to verify the center point. Select a new location for the center point, or type m and select another vector arc to match the center point.
- Enter r (Radius) to verify the radius. Select a new radius, type a new radius at the command line, or type m and select another vector arc to match the radius. Depending on the setting you selected in the Raster Design Options dialog box, you can right-click to select a radius from a Most Recently Used list or a Most Frequently Used list.
- Enter u (Undo) to undo the last arc selected.
- Press Enter to exit the command.