Use this dialog box to edit the observations of an existing named traverse or to enter traverse observations for a new empty traverse.
The left pane of the Traverse Editor displays the following properties for the selected setup within the current station point:
Displays the station point number.
Displays the backsight number.
Specifies the backsight direction.
Specifies the orientation of the horizontal circle when backsighting the point.
Specifies the measured instrument height.
Displays the instrument elevation.
Displays the northing value.
Displays the easting value.
Displays the elevation.
Displays the latitude.
Displays the longitude.
In the right pane of the Traverse Editor you can enter observations for each Setup and specify the following;
Specifies a traverse station point name.
Specifies the angle using the current Survey database units.
Specify one of the following:
Specify the distance in the current Survey database units.
Specify one of the following:
Specifies the vertical type.
Specify one of the following:
Specifies the target height.
Specify one of the following:
Specifies the scale factor.
Specifies a description.
Displays the easting.
Displays the northing.
Displays the elevation.
Displays the latitude.
Displays the longitude.