Connections Tab (Structure Properties Dialog Box)

Use this tab to make adjustments to pipes that are connected to a single structure. This tab also lists pressure pipes that are connected to structures.

The Connections tab lets you quickly view and edit properties that are important for pipes connected to structures. For example, you can use this tab to edit the following properties on pipes connected to the selected structure:

You can use this tab to quickly perform a variety of edits to pipes that are connected to a structure. You can align the elevations on multiple pipes connected to the structure according to the invert, crown, or centerline elevation of a selected pipe.

The following information describes the properties that are displayed on the Connections tab.

Connected Pipes

Name

Displays the name of the current structure and each pipe connected to it. Read-only.

Status

Displays the current status of each pipe connected to the structure. Read-only.

Description

Displays the description of each pipe connected to the structure. Read-only.

Inner Diameter

Specifies the inner diameter for circular pipes. Editable.

Inner Width

Specifies the inner width for non-circular (rectangular) pipes. Editable.

Inner Height

Specifies the inner height for non-circular (rectangular) pipes. Editable.

Invert Elevation

Specifies the invert elevation of the pipe. Editable.

Centerline Elevation

Specifies the centerline elevation of the pipe. Editable.

Crown Elevation

Specifies the crown elevation of the pipe. Editable.

Slope

Specifies the slope of the pipe coming out of the structure. Read-only.

In/Out

Displays the flow direction of the pipe, indicating if the pipe flows in to or out of the structure. Read-only.

From Structure

Displays the name of the structure at the other end of the pipe. Read-only.

Connected Pressure Pipes

Displays the pressure pipes that are connected to the structure. All properties are read-only.

For more information about connecting pressure pipes to structures, see To Connect and Disconnect Pressure Network Pipes and Gravity Network Structures.

Name

Displays the name of the current structure and each pipe connected to it.

Description

Displays the description of each pipe connected to the structure.

Diameter Inside
Displays the inside diameter of the pipe.
Diameter Outside
Displays the outside diameter of the pipe.
Nominal Diameter Description
Displays the nominal diameter description of the pipe.
Invert Elevation

Displays the invert elevation of the pipe.

Centerline Elevation

Displays the centerline elevation of the pipe.

Crown Elevation

Displays the crown elevation of the pipe.

Slope

Displays the slope of the pipe coming out of the structure.